Episode 4 – Whole lot of Sanding
The Stealth Project Ep4 - Whole lot of Sanding
A whole lot of sanding! I start the sanding and smoothing process of the engine bay. This took about two days to complete for a total of about 10 hours of actual work. Sanding was done with 160/220 grit paper and finished with 3M 600 grit red scrub pads. Some heavy spots were done using a 220 grit sanding wheel. I then break out the 3M glazing putty and fill in the pin holes and level off the welds I did earlier. Then back to more sanding and finally a light coat of primer/sealer